

Igwe anaghị agba nchara igwe anaghị agba nchara LV-K Series akpaka ikuku ikuku Mandrel tọọ njedebe maka Capacitor.

Ngwaahịa

Ngwaahịa

Ogologo oge ole ka Aluminom Electrolytic Capacitors na-adịru?

Ogologo oge ole ka Aluminom Electrolytic Capacitors na-adịru?

Kedu ihe a na-eji Ultracapacitor? Nbibi dị omimi nke ngwa isi niile & ndụmọdụ sitere n'aka ndị nrụpụta Ultracapacitor

Kedu ihe a na-eji Ultracapacitor? Nbibi dị omimi nke ngwa isi niile & ndụmọdụ sitere n'aka ndị nrụpụta Ultracapacitor

Kedu ihe bụ Supercapacitor kacha ukwuu n'ụwa?

Kedu ihe bụ Supercapacitor kacha ukwuu n'ụwa?





Igwe anaghị agba nchara igwe anaghị agba nchara LV-K Series akpaka ikuku ikuku Mandrel tọọ njedebe maka Capacitor.

Igwe anaghị agba nchara igwe anaghị agba nchara LV-K Series akpaka ikuku ikuku Mandrel tọọ njedebe maka Capacitor.

Igwe anaghị agba nchara igwe anaghị agba nchara LV-K Series akpaka ikuku ikuku Mandrel tọọ njedebe maka Capacitor.

Igwe anaghị agba nchara igwe anaghị agba nchara LV-K Series akpaka ikuku ikuku Mandrel tọọ njedebe maka Capacitor.

Igwe anaghị agba nchara igwe anaghị agba nchara LV-K Series akpaka ikuku ikuku Mandrel tọọ njedebe maka Capacitor.

Ngwaahịa aha: winding mandrel
ika: China DOXO
Oke nnabata: +-0.002
Nkọwa: 1.5-8.0
Nkwado: nhazi nhazi nhazi omenala
Arụ ọrụ: capacitor winding igwe batrị winding igwe
Ihe: igwe anaghị agba nchara
Oke ngwa: ụlọ ọrụ mmepụta ihe, batrị ike, ihe nkiri capacitors, wdg.
Uru ngwaahịa: ike siri ike, nnukwu egweri, ogologo ndụ, mkpụrụ ngwaahịa ka mma, nnukwu concentricity, usoro mkpuchi

Nyefee arịrịọ

Nkọwa

akara

Njirimara igwe ikuku na-akpaghị aka

1. Ọ nwere ọrụ nke ndọpụ ihe nkiri ígwè na ịkpụpụ, nchebe nke ihe nkiri ọkụ na-akwado n'ime, nhicha nhọrọ nke ihe nkiri ígwè, izere uzuzu, ịchekwa ihe nkiri ígwè na imeziwanye arụmọrụ ngwaahịa.
2. A na-etinye ihe eji eme ihe n'otu akụkụ nke otu conduit, nke na-eme ka coaxial nke abụọ nke ọkara axes na ikuku ikuku dị mma.
3. Ọ nwere ọrụ nke akpaka tightening na akpaka tupu ịpị isi-ụdị film ihe.
4. Ọ nwere ọrụ nke mkpochapụ akpaka na nhazi nke ngwaahịa mbụ na-adịghị mma.
5. Igwe a na-anabata njikwa ihuenyo mmetụ PLC +, na ikike, esemokwu, mgbako nrụgide, nchekwa na ọrụ ọgụgụ.
6. A na-achịkwa nrụgide nke wiil isi site na pneumatic okpukpu abụọ
wheel nrụgide; nrụgide nke wheel na-agbanwe agbanwe; na nrụgide na-achịkwa valvụ nha nha eletrik.
7. The dum igwe na-achịkwa Panasonic AC servo usoro, na winding esemokwu na-achịkwa Japanese ziri ezi obere esemokwu cylinder, nke nwere ike imeziwanye izi ezi na-akwụghachi esemokwu mgbe ọsọ na-agbada.
8. Metallized film ihe axis unwinding nwere nsụgharị na-esochi flattening rola usoro iji gbochie nke ọma ihe nkiri wrinkling; Ntugharị ihe tray na-anabata ntụzịaka kọlụm abụọ iji kwalite izi ezi ngagharị.
9. Enwere ike imezi ngwa ngwa nke ngwugwu ime na n'èzí, mkpuchi elu na n'ime.
10. Ọ nwere ọrụ nke akara okpomọkụ nke abụọ. Enwere ike ịtọ oge na nrụgide nke akara ọkụ nke mbụ na akara okpomọkụ nke abụọ, nke dị mma maka usoro ọzọ.
11. Ọ nwere ọrụ nke igosipụta ọnọdụ mgbaàmà I / O nke PLC; mkpu mmejọ ahụ nwere ngosipụta anya nke ngwọta nduzi mmejọ.
12. Nga ngbanwe nke akpaka stagger ọnọdụ na izi ezi mainte nance ọrụ nke nhọrọ film ihe.

Nka nka nke ngwa LV-K Series

类别 udi	项目 oru ngo			K-100L-A	K-100L-B	K-150L-A	K-150L-B
用膜尺寸 Nha ihe nkiri	双卷材料宽度 Obosara ihe mpịakọta okpukpu abụọ	mm		20-50		30-75
	金属薄膜材料厚度 Ọkpụrụkpụ nke ihe nkiri ihe nkiri igwe μm			2.5-10
	内、外包光膜宽度 Obosara ihe nkiri anya n'ime na mpụta μm			20-5030-75
	内、外包光膜厚度 Ọkpụrụkpụ nke ihe nkiri anya n'ime na mpụta μm			12 月20日
	金属薄膜用卷内/外径mm Dayameta ime/Mpụta nke ihe nkiri igwe			75/300
	外包光膜用卷内/外径mm Dayameta nke ime/mpụta ihe nkiri mkpuchi			40/75-250
	铝箔厚度 Aluminom foil ọkpụrụkpụ μm			15-20
	铝箔宽度 Aluminom foil obosara	mm		/	140	/	180
	铝箔内/外径 Dayameta ime/Mpụta nke Aluminom foil		mm	40/160
芯子尺寸 Nha nha	标准卷针直径 Standard mandrels dayameta	mm		7,8,10,12	7,8,10,12	8,10,12,14	10,12,14,18
	卷针范围 Oke nke mandrels	mm		30		40
	素子最大直径mm Oke dayameta nke ihe			80		80
设备基本参数 Ntọala ntọala nke akụrụngwa	材料挂轴 Ihe nkwudo aro	PC		8
	主卷最高速度 Oke ọsọ nke isi olu			转速度6000rpm；线速度7000mm/s
	张力范围 Oke esemokwu	g		30-800		40-1000
	压力范围 Oke nrụgide	g		100-1800
	设备尺寸（长x宽x高）mm Akụkụ akụrụngwa (L x W xH)			1532x1544x21422042x1544x21421532x1544x21422042x1544x2142
	设备净重 Net arọ nke akụrụngwa	n'arọ		2.00024E+15
	气源Mpa Isi iyi gas			0.5-0.6
	电源 Ịnye ọkụ			AC 220V ± 10% 50Hz 5.0Kw

Ihe osise nke oke ikuku

LV-K

Ịse ihe owuwu ikuku

Igwe anaghị agba nchara igwe anaghị agba nchara LV-K Series akpaka ikuku ikuku Mandrel tọọ njedebe maka Capacitor 1.

Nke gara aga Osote

Kpọtụrụ anyị

Ngwaahịa ndị ewu ewu emetụtara

Igwe nchekwa capacitor gluu

Igwe nchekwa capacitor gluu

https://sccdn.sechitech.com/dgdx/uploads/81025334afa32b02bbfd2575e8cce9ca.mp4

Gụkwuo 🡥

Ahaziri wedge bonding ngwá ọrụ nke aluminum waya ịgbado ọkụ akpaaka akụrụngwa

Ahaziri wedge bonding ngwá ọrụ nke aluminum waya ịgbado ọkụ akpaaka akụrụngwa

https://dgdx-elec.com/wp-content/uploads/2023/01/s-2.mp4 Nkọwapụta diame waya ọdabara...

Gụkwuo 🡥

Atụmatụ mmiri rọba dị elu maka anwụ bonder ASM

Atụmatụ mmiri rọba dị elu maka anwụ bonder ASM

https://dgdx-elec.com/wp-content/uploads/2022/07/Soldering-equipment-solder-head-ejector-pin-suct...

Gụkwuo 🡥

Factory ozugbo nnukwu winding mandrel setịpụrụ maka capacitor nke elu-ọsọ ụgbọ oloko ọhụrụ ike ike

Factory ozugbo nnukwu winding mandrel setịpụrụ maka capacitor nke elu-ọsọ ụgbọ oloko ọhụrụ ike ike

https://dgdx-elec.com/wp-content/uploads/2022/12/Spindle-usage-video.mp4 Aha ngwaahịa: winding ma...

Gụkwuo 🡥

Igwe ikuku maka mmalite capacitor

Igwe ikuku maka mmalite capacitor

1. Igwe a na-achịkwa Siemens PLC na ihuenyo mmetụ. Ọ nwere ọrụ nke ikike ...

Gụkwuo 🡥

High compressive ike push cutter maka push-adọpụ akpaka akụrụngwa eji na nkwakọ nke akpakanamde electronics, IGBT, triode, diode, mgbochi na ndị ọzọ ubi.

High compressive ike push cutter maka push-adọpụ akpaka akụrụngwa eji na nkwakọ nke akpakanamde electronics, IGBT, triode, diode, mgbochi na ndị ọzọ ubi.

https://dgdx-elec.com/wp-content/uploads/2023/01/s-1.mp4 Ngwaahịa No.:DXTD-22001 Ngwaahịa aha: pus...

Gụkwuo 🡥

Mandrel maka ulo oru mmalite capacitors

Mandrel maka ulo oru mmalite capacitors

Gụkwuo 🡥

Igwe ikuku igwe LV-E Series Capacitor

Igwe ikuku igwe LV-E Series Capacitor

1. Nke a igwe adopts Siemens enwekwukwa Smart PLC na ihuenyo mmetụ akara, na ike calcula ...

Gụkwuo 🡥

Igwe ikuku na-akpaghị aka nke LV-HM maka Capacitor

Igwe ikuku na-akpaghị aka nke LV-HM maka Capacitor

Njirimara igwe ikuku akpaaka 1. Igwe a bu contro...

Gụkwuo 🡥

Igwe ikuku na-akpaghị aka LV-S Series

Igwe ikuku na-akpaghị aka LV-S Series

Njirimara igwe ikuku akpaaka 1. AC servo moto ebubata...

Gụkwuo 🡥

Ogwe oghere, ite, plunger maka nkwakọ ngwaahịa semiconductor ejiri maka ngwa elektrọnik, IGBT, triode, diode

Ogwe oghere, ite, plunger maka nkwakọ ngwaahịa semiconductor ejiri maka ngwa elektrọnik, IGBT, triode, diode

https://dgdx-elec.com/wp-content/uploads/2023/01/s-2.mp4 Nkọwapụta A(-0.001) B(¡À0. 001)...

Gụkwuo 🡥

Ndị na-emepụta akụkụ igwe ikuku na-emepụta na china nwere ọnụ ala dị elu dị elu

Ndị na-emepụta akụkụ igwe ikuku na-emepụta na china nwere ọnụ ala dị elu dị elu

https://dgdx-elec.com/wp-content/uploads/2022/12/Mandrel-video-of-metallized-film-winding-machine...

Gụkwuo 🡥

Cutter Blade maka igwe na-ejikọta waya aluminom na-eji igwe tungsten carbide Japanese

Cutter Blade maka igwe na-ejikọta waya aluminom na-eji igwe tungsten carbide Japanese

https://dgdx-elec.com/wp-content/uploads/2023/01/s-4.mp4 ¡ï Ngwaahịa a bụ nke nwere mkpa pụrụ iche...

Gụkwuo 🡥

MGP ebu plunger mmanya na ite edobere maka nkwakọ ngwaahịa semiconductor

MGP ebu plunger mmanya na ite edobere maka nkwakọ ngwaahịa semiconductor

Nọmba ngwaahịa.:DXMJ-22001 Aha ngwaahịa: Cavity plunger Brand: China DOXO Oke nnabata: +-0.002 Pr...

Gụkwuo 🡥

720 plastic waya ndu akụkụ mapụtara maka semiconductor aluminum waya bonding akụrụngwa (N Series)

720 plastic waya ndu akụkụ mapụtara maka semiconductor aluminum waya bonding akụrụngwa (N Series)

Nọmba ngwaahịa

Gụkwuo 🡥

Nduzi waya plastik akụkụ mapụtara maka ihe eji ejikọ igwe igwe semiconductor aluminom

Nduzi waya plastik akụkụ mapụtara maka ihe eji ejikọ igwe igwe semiconductor aluminom

Nọmba ngwaahịa

Gụkwuo 🡥

 Ihe gbasara

 Kpọtụrụ

Biko hapụ anyị ozi